So, 2 slots for sup720's and fill the rest of the slots with 6704's and you can do 28 line rate 10G ports. Packet rate can get a bit dicey when it gets really high on the 6704's but other than that, fairly solid cards. Minimal routing means that you should be able to use that Sup720 for a while.
--chip On Fri, Jan 20, 2012 at 3:08 PM, Phil Mayers <[email protected]> wrote: > Alessandra Forti <[email protected]> wrote: > >>Hi, >> >>I got some money to upgrade my network infrastructure from 1Gbps to >>10Gbps. >> >>At the moment I have a cat6509E with a Sup720. This system has been >>working fine for 6 years. The upgrade will have to last a similar >>number >>of years and our main requirement is throughput with minimal routing if >> > > The 6[78]16 cards are only 40g. Each 4 port group has 10g. We have some, and > frankly they're a bit awkward because of this. > > I would seriously look into the 6908 cards if you want the throughput. > -- > Sent from my phone. Please excuse brevity and typos. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Just my $.02, your mileage may vary, batteries not included, etc.... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
