On 23/02/12 13:56, Chris Lane wrote:
running a 7600 with s72033-advipservicesk9_wan-mz.122-33.SXH7 actually just installed device, added crypto key rsa ~ all normal here, noting unusual to report. but, oddly this is what i am seeing when i try and ssh to box. The remote system refused the connection.
Do you have: line vty .. transport input telnet ssh ? If you have an access-class statement on the vty lines, is it valid for SSH
I have loaded ssh to 100s of boxes so its not a learning issue... I don't know how to debug, we use radius, i can telnet without issue..
Well: term mon debug ip ssh ...to get started. Best login via telnet when doing this.
ssh is the culprit.. Yet ssh is running SSH Enabled - version 1.99 i have even zeroized the key and regenerated.. any suggestions would be helpful
Can you do "sh run part line" and show us? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
