Thank you all to who replied. This has been fixed. it was a simple command i overlooked on the line vty transport ssh.
thanks again Chris On Thu, Feb 23, 2012 at 9:08 AM, Andriy Bilous <[email protected]>wrote: > vty 0 4 > transport input ssh > ? > > debug ip ssh on the router ssh -vvv on the client? > > On Thu, Feb 23, 2012 at 2:56 PM, Chris Lane <[email protected]> wrote: > > running a 7600 with s72033-advipservicesk9_wan-mz.122-33.SXH7 > > actually just installed device, added crypto key rsa ~ all normal here, > > noting unusual to report. > > but, oddly this is what i am seeing when i try and ssh to box. > > The remote system refused the connection. > > > > I have loaded ssh to 100s of boxes so its not a learning issue... I > don't > > know how to debug, we use radius, i can telnet without issue.. > > ssh is the culprit.. Yet ssh is running > > SSH Enabled - version 1.99 > > > > i have even zeroized the key and regenerated.. > > > > any suggestions would be helpful > > > > Thanks > > Chris > > -- > > //CL > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- //CL _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
