Hi Peter Right now it's not supported, but keep an eye on upcoming software releases for the Sup2T.
Lars Christensen CCIE #20292 Den 24/02/2012 kl. 11.45 skrev Peter Rathlev: > Hi, > > We're trying to find out if the ASA services module is supported on the > Sup2T. Our guess it that it is, but the documentation isn't clear about > it. We found the following references: > > http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps11878/qa_c67-648478.html#wp9000260 > > The list says that the ASA module is supported, but the table underneath > doesn't mention it. > > http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.0SY/release_notes.html#wp2565770 > > ASA services module not mentioned as supported in the 15.0SY release > notes. > > http://www.cisco.com/en/US/customer/prod/collateral/modules/ps2706/ps11621/data_sheet_c78-672507.html#wp9000181 > > Does not list the Sup2T under "Supervisor Card" in "System > Requirements". > > Since the FWSM does seem to be supported, I'd guess that the ASASM is > too. But maybe not in the current software releases. > > Anybode have any hard facts about this? > > -- > Peter > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
