On 06/06/2012, at 12:53 PM, Natambu Obleton wrote: > I changed the PA-MC-T3s to line clocking, but still getting errors. If I > connect both T1s to the same DS3, everything is fine. It's only if I spread > the MLPPP T1's across the PA-MC-T3. I don't have the spread them, but it does > the customer some redundancy. The CPE is an Adtran TA908e. > > Since I know the Adtran uses the same clock for both T1s and the PA-MC-T3's > aren't, I have changed the T1 ports on the PA-MC-T3 to line and changed the > adtran to internal and the slips have stopped. I do feel better with the > PA-MC-T3 set to line on the DS3. Common clock achieved, sorta. :)
Hi Natambu, How many clock sources do you have on your network?! Normally the carrier provides the clock and all your gear should sync to that.... Andrew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
