Hi, On 18 July 2012 09:20, Aaron <[email protected]> wrote: > Do y'all know if me3600x can do 6vpe ? if so how ? (I mean basic configs > to get going using directly connect pe---ce ip advertisements of ipv6 > prefixes, oh and bare in mind that I already have functional vpvn4 mpls > l3vpn's running..so I just wanna add on v6 capability (which I understand > defines 6vpe))
According to my friendly SE - 6VPE is committed for 15.2.(4)S (likely Q3FY12). > Also, if I use a redundant rr ibgp architecture for my pe's neighboring for > L3VPN's..is there any ipv6 specific configs that will need to be put on the > redundant rr's in order for 6vpe to work? I read that the sp core remains > ipv4 only even though you enable 6vpe on the edge..so I'm wondering if I > don't have to do anything on the rr's. lemme know You'll have to enable vpnv6 family on the sessions with your 6VPEs. Effectively a copy of your vpnv4 family settings; and except for the family name there is no trace of IPv6 in the config of the RR. kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
