Thanks Waris, sharing with community in case they wanted to know too.... yes sir, and also my SE told me this morning same....
"On the ME3600, yes 6VPE is planned for release 15.2(4)S.The release is planned to be on CCO by 7/30." -----Original Message----- From: Waris Sagheer (waris) [mailto:[email protected]] Sent: Wednesday, July 18, 2012 11:26 AM To: Aaron; 'Pshem Kowalczyk' Subject: RE: [c-nsp] me3600x 6vpe Actual date is July 30th. Regards, Waris -----Original Message----- From: Aaron [mailto:[email protected]] Sent: Wednesday, July 18, 2012 5:42 AM To: Waris Sagheer (waris); 'Pshem Kowalczyk' Subject: RE: [c-nsp] me3600x 6vpe Thanks Waris and Pshem, isn't 3rd quarter 2012 now? (July - September) Aaron -----Original Message----- From: Waris Sagheer (waris) [mailto:[email protected]] Sent: Wednesday, July 18, 2012 5:55 AM To: Aaron; 'Pshem Kowalczyk' Cc: [email protected] Subject: RE: [c-nsp] me3600x 6vpe That's correct. 6PE/6VPE will be supported in 15.2(4)S, Q3Cy12. Regards, Waris -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Aaron Sent: Tuesday, July 17, 2012 2:56 PM To: 'Pshem Kowalczyk' Cc: [email protected] Subject: Re: [c-nsp] me3600x 6vpe Thanks a bunch, good info. I'll keep looking for 15.2(4)S Aaron -----Original Message----- From: Pshem Kowalczyk [mailto:[email protected]] Sent: Tuesday, July 17, 2012 4:40 PM To: Aaron Cc: [email protected] Subject: Re: [c-nsp] me3600x 6vpe Hi, On 18 July 2012 09:20, Aaron <[email protected]> wrote: > Do y'all know if me3600x can do 6vpe ? if so how ? (I mean basic > configs to get going using directly connect pe---ce ip advertisements > of ipv6 prefixes, oh and bare in mind that I already have functional > vpvn4 mpls l3vpn's running..so I just wanna add on v6 capability > (which I understand defines 6vpe)) According to my friendly SE - 6VPE is committed for 15.2.(4)S (likely Q3FY12). > Also, if I use a redundant rr ibgp architecture for my pe's > neighboring for L3VPN's..is there any ipv6 specific configs that will > need to be put on the redundant rr's in order for 6vpe to work? I > read that the sp core remains > ipv4 only even though you enable 6vpe on the edge..so I'm wondering if > I don't have to do anything on the rr's. lemme know You'll have to enable vpnv6 family on the sessions with your 6VPEs. Effectively a copy of your vpnv4 family settings; and except for the family name there is no trace of IPv6 in the config of the RR. kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
