On Tue, 2012-07-31 at 09:34 -0700, Mike wrote: > Damm, you are right. My problem is that I have many pppoe subscribers > on one side of the link, talking to essentially 1 server. So if rr > isn't an option, then I would likely need to do load-balance per > source mac on the subscriber side and by dest mac on the server side.
It's always the sender doing the load-balancing, so that should be possible by just using two different algos on each side of the link. Alternatively, e.g. if you have more than just two switches, you might get good results with "src-dst-mac". I'm pretty sure none of the Catalyst switches can recognise PPPoE and extract L3 information from the packets, so there's just the MAC addresses. -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
