Not sure if it supports ipv6 header hashing, but I suspect not - this sort of thing would normally be explicitly documented if it were supported.
fwiw, other vendor switches have much better support for this than Cisco.
Not sure if I am hijacking this thread, just curious if anyone has done src-dst-ip load balancing on a etherchannel with IPv6 on the 2970 as it seems to be possible; show etherchannel load-balance EtherChannel Load-Balancing Operational State (src-dst-ip): Non-IP: Source XOR Destination MAC address IPv4: Source XOR Destination IP address IPv6: Source XOR Destination IP address C. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
