Hey networkers, I have 3 sites connected to a service providers MPLS network. Two of those sites (Dallas and LA) are configured as etherchannel/LACP ports with 2 1gig uplinks in them. On our end we have Catalyst 6506-E switches the provider side is Juniper gear (I don't have model info). The issue I am seeing is that on our side we are sending traffic out of both interfaces and appear to be load balancing correctly. The provider (juniper) side is only sending traffic inbound to us over 1 of the links and not using the full etherchannel to load balance in coming bandwidth. On the LA end the juniper routers are seeing two mac addresses learned on that etherchannel - one mac is the SVI and one mac is one of the member ports. The Dallas side is only seeing one mac address. The service provider is telling me that their hardware is working correctly and that the hashing algorithm on the juniper boxes is deciding that only one link should receive traffic. Anyone else see this issue or can provide any tips.
Thanks! Joseph _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/