Which hashing algorithm are the using? One based on MAC address will do exactly as you are describing.
Andrew Sent from a mobile device On 07/09/2012, at 6:58, Joseph Jackson <[email protected]> wrote: > Hey networkers, > > I have 3 sites connected to a service providers MPLS network. Two of > those sites (Dallas and LA) are configured as etherchannel/LACP ports > with 2 1gig uplinks in them. On our end we have Catalyst 6506-E > switches the provider side is Juniper gear (I don't have model info). > The issue I am seeing is that on our side we are sending traffic out > of both interfaces and appear to be load balancing correctly. The > provider (juniper) side is only sending traffic inbound to us over 1 > of the links and not using the full etherchannel to load balance in > coming bandwidth. On the LA end the juniper routers are seeing two > mac addresses learned on that etherchannel - one mac is the SVI and > one mac is one of the member ports. The Dallas side is only seeing > one mac address. The service provider is telling me that their > hardware is working correctly and that the hashing algorithm on the > juniper boxes is deciding that only one link should receive traffic. > Anyone else see this issue or can provide any tips. > > Thanks! > > Joseph > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
