Couldn't you do a "show startup-config"? This is assuming that the config was saved before the failure, of course. If that also omits the down line card, how about "more nvram:startup-config"? On Sep 9, 2012 12:15 PM, "John Neiberger" <[email protected]> wrote:
> We had a linecard fail on an ASR9K and I wanted to verify what was > connected to it. However, since the card was down, all configuration > information was hidden. How do I see the interface configurations for > a module that is not currently active? In other words, how do I see > what config will be enabled once a new linecard is inserted? > > Thanks! > John > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
