On Mon, Sep 10, 2012 at 1:55 AM, Gergely Antal <[email protected]> wrote: > Hi > > As this doc states the config should be visible in the running config: > http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.2/system_management/configuration/guide/b_sysman_cg42asr9k_chapter_0110.html#con_58280
Very interesting! That is definitely not happening for us. This particular router is running 4.0.1, which is fairly old already and probably pretty buggy. I wonder if we're just running into a bug. I'll check into that. > > > > On 09/10/2012 09:42 AM, Gergely Antal wrote: >> Hi >> >> Is this working for you: >> >> show configuration history last 10 >> show configuration commit changes <commit-id> >> >> This is on ver 4.2.1... >> >> On 09/10/2012 12:28 AM, John Neiberger wrote: >>> On Sun, Sep 9, 2012 at 3:36 PM, Gary Buhrmaster >>> <[email protected]> wrote: >>>> On Sun, Sep 9, 2012 at 5:08 PM, John Neiberger <[email protected]> >>>> wrote: >>>>> ... In other words, how do I see >>>>> what config will be enabled once a new linecard is inserted? >>>> >>>> Check your rancid (backup) configuration files? >>> >>> Yes, that would easily work but I was curious to find a way to do it >>> from the router. There surely must be a way to see what configuration >>> will be applied when a new module is inserted, but even the TAC >>> engineer I was working with earlier didn't know how to do it. >> >> > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
