I believe I saw all the interfaces from the slot where the card was as "interface preconfigure x/x/x/x"
adam -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of John Neiberger Sent: Monday, September 10, 2012 12:29 AM To: Gary Buhrmaster Cc: [email protected] Subject: Re: [c-nsp] How to see inactive configuration on ASR9K during card failure On Sun, Sep 9, 2012 at 3:36 PM, Gary Buhrmaster <[email protected]> wrote: > On Sun, Sep 9, 2012 at 5:08 PM, John Neiberger <[email protected]> wrote: >> ... In other words, how do I see >> what config will be enabled once a new linecard is inserted? > > Check your rancid (backup) configuration files? Yes, that would easily work but I was curious to find a way to do it from the router. There surely must be a way to see what configuration will be applied when a new module is inserted, but even the TAC engineer I was working with earlier didn't know how to do it. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
