Thanks Chuck
> From: [email protected] > To: [email protected]; [email protected] > Subject: RE: [c-nsp] BGP full table - 7200 NPE-G2 > Date: Wed, 17 Oct 2012 08:10:33 -0400 > > I've got a 2821 running 12.4 mainline with two feeds, its 768MB RAM still > has about 300MB free. You should be fine. 15.0 or 15.1 will probably use > more RAM, but if you're anywhere near 500MB free, the second feed shouldn't > use any more than 100MB additional. > > Chuck > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of CiscoNSP_list > CiscoNSP_list > Sent: Wednesday, October 17, 2012 3:03 AM > To: [email protected]; [email protected] > Subject: Re: [c-nsp] BGP full table - 7200 NPE-G2 > > > > Thanks - unfortunately this 7200 is 1000Km's away, so ram upgrade is not > easy Will 1GB support 2 full tables? > > > > > Date: Wed, 17 Oct 2012 09:38:59 +0300 > > From: [email protected] > > To: [email protected] > > Subject: Re: [c-nsp] BGP full table - 7200 NPE-G2 > > > > On (2012-10-17 14:23 +1100), CiscoNSP_list CiscoNSP_list wrote: > > > > > Apologies - No, only 1Gb ram.... > > > > DRAM is practically free and in these cases often literally if you > > have time to snoop other people's trashes. > > Always max out DRAM before deploying new routers, as the cost of work > > to do it later is orders of magnitude higher than cost of part to do > > it pre-deployment. > > > > -- > > ++ytti > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
