"The Supervisor 2T provides backward compatibility with the existing WS-X6700 Series Linecards (with the exception of the WS-X6708-10G, which will be replaced by the new WS-X6908-10G, discussed later), as well as select WS-X6100 Series Linecards only. There is no support for the WS-X62xx, WS-X63xx, WS-X64xx, or WS-X65xx Linecards. Note: All WS-X67xx Linecards equipped with the Central Forwarding Card (CFC) are supported in a Supervisor 2T system, and will function in centralized CEF720 mode."
From: http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-676346.html - Ed ------Original Message------ From: Drew Weaver Sender: [email protected] To: [email protected] Subject: [c-nsp] WS-X6708-10G-3CXL usable with SUP2T? Sent: Jan 8, 2013 12:33 PM Hi, I was reading the spec sheet for the SUP2TXL on cisco's site and it mentions that you can upgrade the x6704 and the x6716 with the DFC4 to make it compatible with the SUP2T but it doesn't say anything about the X6708. Does anyone have any solid information about whether these cards (which we have a lot of) will work with the new supervisors? Thanks, -Drew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
