Hi,
> -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Drew Weaver > Sent: martedì 8 gennaio 2013 18:33 > To: [email protected] > Subject: [c-nsp] WS-X6708-10G-3CXL usable with SUP2T? > > Hi, > > I was reading the spec sheet for the SUP2TXL on cisco's site and it > mentions that you can upgrade the x6704 and the x6716 with the DFC4 to > make it compatible with the SUP2T but it doesn't say anything about the > X6708. It's a no go... I was looking at getting some 6708/6704 cards and stumbled onto this note awhile back. Note: Due to compatibility issues, the WS-X6708-10GE-3C/3CXL cannot be inserted in a Supervisor 2T system, and must be upgraded to the new WS-X6908-10GE-2T/2TXL Source the sup 2T whitepaper. http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/white_paper_c11-676346.html Regards Brian > > Does anyone have any solid information about whether these cards (which > we have a lot of) will work with the new supervisors? > > Thanks, > -Drew > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ --- This e-mail is intended only for the addressee named above. As this e-mail may contain confidential or privileged information, if you are not the named addressee, you are not authorized to retain, read, copy or disseminate this message or any part of it. Please consider your environmental responsibility before printing this e-mail. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
