Hi all I was looking for some advice on what technology to use to automate small config changes to an asr1001
Changes will be small, such as adding & removing subinterfaces \ IPs and adding \ removing the odd static route for customers. Through googling so far what i've found 1. SSH based connection - e.g. clogin \ expect type process 2. Dropping the config onto a tftp server then using snmp to trigger config download and wr mem 3. I've seen IOS XR XML for the asr 9000 but since asr used ios xe this may not be an option Unfortunately there isn't budget to buy an off the shelf product. Would be interested in hearing people's experiences as i'm sure im not the first to go down this road. Thanks! Bryan Tabb p.s. Version info if that helps #sh ver Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 1 5.1(1)S, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2010 by Cisco Systems, Inc. Compiled Mon 22-Nov-10 12:33 by mcpre _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
