On 1/15/13, Bryan Tabb <[email protected]> wrote: > Hi all > > I was looking for some advice on what technology to use to automate small > config changes to an asr1001 > > Changes will be small, such as adding & removing subinterfaces \ IPs and > adding \ removing the odd static route for customers. > > Through googling so far what i've found > > > 1. SSH based connection - e.g. clogin \ expect type process
clogin is really nice but you have to escape TCL special characters, so tasks like setting the snmp community string can be a real pain > 2. Dropping the config onto a tftp server then using snmp to trigger > config download and wr mem easier than clogin since you don't have to worry about special characters, but our security office sees 'clear text protocol' (ie. tftp) and has a fit > > 3. I've seen IOS XR XML for the asr 9000 but since asr used ios xe > this may not be an option never tried it supposedly another option is to scp a config snippet to the running-config. haven't gotten around to trying that yet either regards, lee _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
