Thanks Mattias. Where did you increase your MTU? Much appreciated, Eric
________________________________ From: Mattias Gyllenvarg <[email protected]> To: Eric A Louie <[email protected]> Sent: Tue, January 15, 2013 10:43:58 PM Subject: Re: [c-nsp] mpls ip creating traffic disturbance(s) We hit the "dont forget too increase MTU# gotcha when implementing MPLS on our Ethernet backbone. But it did only affect traversing traffic. Including our own HQ. :P On 16 January 2013 01:18, Eric A Louie <[email protected]> wrote: We implemented what seemed to be a pretty simple mpls configuration to test a >vrf config. > >It caused widespread havoc across my production network. > >Has anyone encountered a situation where they've put "mpls ip" on a link and had >it cause problems with web browsing to the Internet, even on traffic that passed >through the router that was not going through the mpls ip interfaces? > >I have a case open with Cisco TAC but was looking for some additional guidance >and perhaps some experience around this strange problem. > > Much appreciated, Eric >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- *Med Vänliga Hälsningar - Best Regards* *Mattias Gyllenvarg* *Nätutveckling* Bredband2 Tel: +46 406219712 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
