ASR1001 have their own designed RP something between RP1 and RP2 by performance of CPU, its Dual-Core 2.2GHz. RP1 is 1.5GHz Freescale 8548 RP2 is Dual-Core 2.66GHz (XEON)
On 22/03/13 12:40, Christian Kratzer wrote: > Hi, > > we a have a pair of ASR1001 with 4GB ram and want to max them out with 8 > or 16 GB of ram. We are planning on getting one of these part numbers > from a third party supplier: > > Cisco ASR1001 8GB RAM M-ASR1K-1001-8GB= > Cisco ASR1001 16GB RAM M-ASR1K-1001-16GB= > > Is there any command we could use to check if we have an RP1, RP2 > whatever and somehow validate above choices ? > > All I can dig up is following: > > # show version > > cisco ASR1001 (1RU) processor with 1163580K/6147K bytes of memory. > Processor board ID xxxxxxxxxx > 9 Gigabit Ethernet interfaces > 32768K bytes of non-volatile configuration memory. > 4194304K bytes of physical memory. > 7782399K bytes of eUSB flash at bootflash:. > > # show platform diag > > Chassis type: ASR1001 > ... > Slot: R0, ASR1001 > Running state : ok, active > Internal state : online > Internal operational state : ok > Physical insert detect time : 00:00:43 (1w1d ago) > Software declared up time : 00:00:43 (1w1d ago) > CPLD version : 10042219 > Firmware version : 15.0(1r)S > > Slot: F0, ASR1001 > Running state : ok, active > Internal state : online > Internal operational state : ok > Physical insert detect time : 00:00:43 (1w1d ago) > Software declared up time : 00:01:31 (1w1d ago) > Hardware ready signal time : 00:01:20 (1w1d ago) > Packet ready signal time : 00:01:37 (1w1d ago) > CPLD version : 10042219 > Firmware version : 15.0(1r)S > > # show inventory > > NAME: "module R0", DESCR: "Cisco ASR1001 Route Processor" > PID: ASR1001 , VID: V02, SN: xxxxxxxxxxx > > > Greetings > Christian > > > > > > > > > > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
