Hi Chris, We use an 8GB chip in 1001's.
He's a comparison of a default 4GB 1001 with similar output to yours vs another 1001 with 8GB. ASR1001 with 4GB memory #sh version | inc mem cisco ASR1001 (1RU) processor with 1188910K/6147K bytes of memory. 32768K bytes of non-volatile configuration memory. 4194304K bytes of physical memory. ASR1001 with 8GB memory #show version | inc mem cisco ASR1001 (1RU) processor with 3851196K/6147K bytes of memory. 32768K bytes of non-volatile configuration memory. 8388608K bytes of physical memory. I'm not sure if this ordering guide is 100% up to date yet it might offer some re-assurance. http://www.cisco.com/en/US/prod/collateral/routers/ps9343/product_bulletin_c07-448862.html#wp9002889 Mick On Fri, Mar 22, 2013 at 7:40 PM, Christian Kratzer <[email protected]>wrote: > Hi, > > we a have a pair of ASR1001 with 4GB ram and want to max them out with 8 > or 16 GB of ram. We are planning on getting one of these part numbers from > a third party supplier: > > Cisco ASR1001 8GB RAM M-ASR1K-1001-8GB= > Cisco ASR1001 16GB RAM M-ASR1K-1001-16GB= > > Is there any command we could use to check if we have an RP1, RP2 > whatever and somehow validate above choices ? > > All I can dig up is following: > > # show version > > cisco ASR1001 (1RU) processor with 1163580K/6147K bytes of memory. > Processor board ID xxxxxxxxxx > 9 Gigabit Ethernet interfaces > 32768K bytes of non-volatile configuration memory. > 4194304K bytes of physical memory. > 7782399K bytes of eUSB flash at bootflash:. > > # show platform diag > > Chassis type: ASR1001 > ... > Slot: R0, ASR1001 > Running state : ok, active > Internal state : online > Internal operational state : ok > Physical insert detect time : 00:00:43 (1w1d ago) > Software declared up time : 00:00:43 (1w1d ago) > CPLD version : 10042219 > Firmware version : 15.0(1r)S > > Slot: F0, ASR1001 > Running state : ok, active > Internal state : online > Internal operational state : ok > Physical insert detect time : 00:00:43 (1w1d ago) > Software declared up time : 00:01:31 (1w1d ago) > Hardware ready signal time : 00:01:20 (1w1d ago) > Packet ready signal time : 00:01:37 (1w1d ago) > CPLD version : 10042219 > Firmware version : 15.0(1r)S > > # show inventory > > NAME: "module R0", DESCR: "Cisco ASR1001 Route Processor" > PID: ASR1001 , VID: V02, SN: xxxxxxxxxxx > > > Greetings > Christian > > > > > > > > > > > > > > -- > Christian Kratzer CK Software GmbH > Email: [email protected] Wildberger Weg 24/2 > Phone: +49 7032 893 997 - 0 D-71126 Gaeufelden > Fax: +49 7032 893 997 - 9 HRB 245288, Amtsgericht Stuttgart > Web: http://www.cksoft.de/ Geschaeftsfuehrer: Christian > Kratzer > ______________________________**_________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/cisco-nsp<https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at > http://puck.nether.net/**pipermail/cisco-nsp/<http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
