Hi Waris, Not very much. But the 250 MDT routes are quite expensive since you loose 8000 ipv4 routes.
Any plans to change this in the future? Regards, Fredrik Vöcks Senior IP Network Engineer On 24 May 2013 01:21, Waris Sagheer (waris) <[email protected]> wrote: > Folks, > Is it not documented properly regarding SDM template? > > Best Regards, > > [http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] > > Waris Sagheer > Technical Marketing Manager > Service Provider Access Group > [email protected]<mailto:[email protected]> > Phone: +1 408 853 6682 > Mobile: +1 408 835 1389 > > CCIE - 19901 > > > <http://www.cisco.com/> > > > > [Think before you print.] Think before you print. > > This email may contain confidential and privileged material for the sole > use of the intended recipient. Any review, use, distribution or disclosure > by others is strictly prohibited. If you are not the intended recipient (or > authorized to receive for the recipient), please contact the sender by > reply email and delete all copies of this message. > > For corporate legal information go to: > http://www.cisco.com/web/about/doing_business/legal/cri/index.html > > > > From: Claes Jansson <[email protected]<mailto:[email protected]>> > Date: Thursday, May 23, 2013 5:34 AM > To: PlaWanSai <[email protected]<mailto:[email protected]>> > Cc: "[email protected]<mailto:[email protected]>" < > [email protected]<mailto:[email protected]>> > Subject: Re: [c-nsp] ME-3600 Can't see ip pim vrf neighbor > > Also be sure to use > > ip pim ssm default > > and > > sdm prefer applications > > By default "MDT mroutes" are 0... > > I have tested this on 15.3(2)S. > > Claes Jansson > Gästabudstaden AB > > On 2013-05-23 08:38, PlaWanSai wrote: > I try to run Multicast VPN on the ME-3600 back-to-back with the 7609. It > does not see pim neighbor. I tested on 15.1(2)EY4, 15.3(1)S and 15.3(2)S > IOS > version. I used this configuration between 7609 is work. > > > > test-co3600#sho ip pim vrf IPTV-M nei > > PIM Neighbor Table > > Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, > > P - Proxy Capable, S - State Refresh Capable, G - GenID Capable > > Neighbor Interface Uptime/Expires Ver DR > > Address > Prio/Mode > > test-co3600# > > > > Thank you very much. > > _______________________________________________ > cisco-nsp mailing list [email protected]<mailto: > [email protected]> > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list [email protected]<mailto: > [email protected]> > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
