Hi,
On Thursday, June 20, 2013 at 8:43 PM, Martin T wrote:
> In which scenario would somebody want to use ME-3600X for
> providing this clock signal? In addition, why would one want to receive
> E1/T1 timing signal on an Ethernet switch?
the switch needs a reference clock source to provide SyncE (an ethernet based
frequency synchronization signal) to downlink (1GE) ports. The reference clock
can be recovered from either a BITS clock input (E1/T1) or SyncE uplink ports.
--Daniel (your colleague :P)
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
