Hi, ME3600x can be used for mobile backhaul. If you do E1/T1 or STM emulation - you have to provide correct clocking to both sides. One end would normally take the clocking of some external source (for example using the BITS port) and the other one would relay on something like 1588v2 (or syncE) to provide the synchronisation onto the E1/T1 circuit.
kind regards Pshem On 21 June 2013 06:43, Martin T <[email protected]> wrote: > Hi, > > Cisco ME-3600X switches support RJ45 BITS(Building Integrated Timing > Source) interface which can be used for sending and receiving the E1 or T1 > timing signals. As I understand, timing signals in case of SDH/SONET are > needed in each node to keep the transmit and receive rates unified all over > the network. In which scenario would somebody want to use ME-3600X for > providing this clock signal? In addition, why would one want to receive > E1/T1 timing signal on an Ethernet switch? > > > regards, > Martin > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
