Here you go:
xxxxxxx#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------
-----------
1 5 Route Switch Processor 720 10GE (Activ RSP720-3CXL-10GE
JAE1436024O
2 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL1515B29K
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAD095100MX
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------
-------
1 0023.eb0e.af70 to 0023.eb0e.af77 2.2 12.2(33r)SRD 12.2(33)SRE5 Ok
2 e05f.b974.c5e8 to e05f.b974.c5ef 2.3 Unknown Unknown PwrDown
3 0015.6215.25a4 to 0015.6215.25bb 2.3 12.2(14r)S5 12.2(33)SRE5 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- -------
-------
1 Policy Feature Card 3 7600-PFC3CXL-10GE JAE14360195 1.2 Ok
1 C7600 MSFC4 Daughterboard 7600-MSFC4 JAE1436018L 2.2 Ok
2 Distributed Forwarding Card WS-F6700-DFC3C SAL15129JJT 1.4
PwrDown
3 Centralized Forwarding Card WS-F6700-CFC SAD094502FU 2.0 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Not Applicable
3 Pass
xxxxxxx#sh power
system power redundancy mode = combined
system power total = 2198.70 Watts (52.35 Amps @ 42V)
system power used = 958.02 Watts (22.81 Amps @ 42V)
system power available = 1240.68 Watts (29.54 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 PWR-2700-AC/4 1319.22 31.41 OK OK on
2 PWR-2700-AC/4 1319.22 31.41 OK OK on
Pwr-Allocated Oper
Fan Type Watts A @42V State
---- ------------------ ------- ------ -----
1 76.86 1.83 OK
Pwr-Requested Pwr-Allocated Admin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1 RSP720-3CXL-10GE 378.00 9.00 378.00 9.00 on on
2 WS-X6708-10GE 444.36 10.58 378.00 9.00 on off (insuff
cooling capacity)
3 WS-X6724-SFP 125.16 2.98 125.16 2.98 on on
xxxxxxx#
xxxxxxx#sh environment
environmental alarms:
system minor alarm on operating fan count (raised 2d02h ago)
backplane:
operating clock count: 2
fan-tray 1:
fan-tray 1 type:
fan-tray 1 fan-fail: OK
clock 1:
clock 1 OK: OK, clock 1 clock-inuse: in-use
clock 2:
clock 2 OK: OK, clock 2 clock-inuse: not-in-use
power-supply 1:
power-supply 1 fan-fail: OK
power-supply 1 power-input: AC 110V
power-supply 1 power-output-mode: low
power-supply 1 incompatible with fan: OK
power-supply 1 power-output-fail: OK
power-supply 2:
power-supply 2 fan-fail: OK
power-supply 2 power-input: AC 110V
power-supply 2 power-output-mode: low
power-supply 2 incompatible with fan: OK
power-supply 2 power-output-fail: OK
module 1:
module 1 power-output-fail: OK
module 1 outlet temperature: 34C
module 1 inlet temperature: 24C
module 1 device-1 temperature: 29C
module 1 device-2 temperature: 32C
module 1 asic-1 (SSA-2) temp: 53C
module 1 asic-3 temperature: 36C
module 1 asic-4 temperature: 48C
module 1 RP outlet temperature: 33C
module 1 RP inlet temperature: 29C
module 1 EARL outlet temperature: 30C
module 1 EARL inlet temperature: 24C
module 3:
module 3 power-output-fail: OK
module 3 outlet temperature: 30C
module 3 inlet temperature: 22C
module 3 device-1 temperature: 22C
module 3 device-2 temperature: 26C
chassis connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 1
module 1 connector rating: 1260.00 Watts (30.00 Amps @ 42V)
module 1 power consumption: 378.00 Watts ( 9.00 Amps @ 42V)
module 2
module 2 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 2 power consumption: 444.36 Watts (10.58 Amps @ 42V)
module 3
module 3 connector rating: 2016.00 Watts (48.00 Amps @ 42V)
module 3 power consumption: 125.16 Watts ( 2.98 Amps @ 42V)
chassis per slot cooling capacity: 70 cfm
ambient temperature: < 55C
module 1 cooling requirement: 35 cfm
module 2 cooling requirement: 84 cfm
module 3 cooling requirement: 70 cfm
On 3/20/2014 4:07 PM, Justin wrote:
Could we get a show power and show environment output?
On Thu, Mar 20, 2014 at 3:44 PM, Lobo <loboti...@gmail.com
<mailto:loboti...@gmail.com>> wrote:
Hey everyone. Looking for some assistance or if anyone has had
any experience with the WS-X6708-10G-3C line card. We're trying
to use this particular card in our 7604 chassis which has the
RSP720-3CXL-10GE processor and 2700W DC power supply. However, we
get errors and the card does not get power to it and in other
cases it says there is not enough cooling for it. Should this
card work in this particular setup? The only other card we have
in the chassis is the X6724-SFP which is functioning fine.
Thanks.
Jose
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
<mailto:cisco-nsp@puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
