On Thu, Mar 20, 2014 at 01:41:12PM -0700, Pete Templin wrote: > > On 3/20/2014 1:23 PM, Lobo wrote: > >xxxxxxx#sh module > >Mod Sub-Module Model Serial Hw Status > >---- --------------------------- ------------------ ----------- > >------- ------- > > 1 Policy Feature Card 3 7600-PFC3CXL-10GE JAE14360195 1.2 Ok > > 2 Distributed Forwarding Card WS-F6700-DFC3C SAL15129JJT > >1.4 PwrDown > > > Here's your answer: incompatible xFC models. You have a 3CXL > supervisor but a 3C DFC aboard the 10G card. It won't power up when > inserted into a running system. > > Step 1: remove the module immediately. If the device reloads <now>, > it'll reboot into 3C mode, which means insufficient FIB slots for a > full table, and that's Bad News(tm). > > Step 2: get a WS-F6700-DFC3CXL and replace the -DFC3C. > > Step 3: reinsert the card.
one could swap the DFC with a CFC depending on your needs as well. - jared -- Jared Mauch | pgp key available via finger from ja...@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/