> I am unable to find an equivalent command to "ip msdp default-peer" in NX- > OS,
Well you can configure the N7K to become a part of the existing mesh-group. Some thoughts that might help you decide. RPF Checks are not done in the following cases: - If the sending MSDP peer is the only MSDP Peer. This would be the case if a single 'msdp-peer' command is configured or if only the 'default-peer' command is used. - If the sending MSDP peer is a Mesh-Group peer. - If the sending MSDP peer address is the RP address contained in the SA message. adam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
