On Wed, Mar 26, 2014 at 1:21 PM, Vitkovský Adam <[email protected]> wrote:
> First of all ME-15.3(1)S is ancient.
I know, but as you can see, others still have a few machines with that
version, as well.
> What does the debug says please? Is the other side xmitting discovery hellos
> or it's just the ASR-4.3.4 that does not see the incoming hellos?
debug mpls ldp interface TenGigE0/0/2/2
debug mpls ldp interface TenGigE0/0/2/3
show nothing
debug mpls ldp messages sent all
debug mpls ldp messages received all
show traffic over TenGigE0/0/2/1
ME-15.3(2)S1:
TenGigabitEthernet0/2 (ldp): xmit/recv
LDP Id: ASR-4.3.4:0; IP addr: <interface IP>
ME-15.3(1)S
TenGigabitEthernet0/1 (ldp): xmit/recv
LDP Id: ASR-4.3.4:0; IP addr: <interface IP>
ASR-4.3.0
TenGigE0/0/2/3 : xmit
> I understand this is just a test setup so far but be careful with the
> "discovery targeted-hello accept".
> As it means anybody can create LDP session to the box.
We are filtering to prefixes which are allowed to talk to that box.
> Also a good practice is to manually specify the router-id for the ldp process.
It uses the router ID by default, but I added that stanza.
Thanks,
Richard
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
