On 26/03/2014 13:09, Richard Hartmann wrote: > On Wed, Mar 26, 2014 at 1:08 PM, Jason Lixfeld <[email protected]> wrote: >> Are your fpd versions up to date too?
the command for this is: RP/0/RSP0/CPU0:router#admin show hw-module fpd location all If you see any "Yes" in the "Upg/Dng?" column, then you need to manually upgrade: RP/0/RSP0/CPU0:router#admin upgrade hw-module fpd all location all fpd upgrades are service affecting and often require either line card or RSP reboots, so upgrades are maintenance window territory. Some people use fpd autoupgrade. I got stung once, so usually do manual upgrades even though it takes longer. As Adam mentioned, 15.3(1) is pretty ancient and it would be advisable to upgrade to the latest 15.3 on your me3600 boxes. There are some hilariously awful mpls bugs, which are slowly being ironed out. E.g. port based l3vpn doesn't work at all on 15.3(1). Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
