On 13 May 2014 09:28, Mattias Gyllenvarg <[email protected]> wrote: > It no just that 11 x 10 > 100 ?
Thats true, my point is that Cisco aren't allowing oversubscribtion :) The plot thickens, I have put the following onto a lab ME3800 and it worked fine. 11x 10Mbps shapers. class-map match-any CUST1-SHAPER match service instance ethernet 10 class-map match-any CUST3-SHAPER match service instance ethernet 30 class-map match-any CUST2-SHAPER match service instance ethernet 20 class-map match-any CUST5-SHAPER match service instance ethernet 50 class-map match-any CUST4-SHAPER match service instance ethernet 40 class-map match-any CUST7-SHAPER match service instance ethernet 70 class-map match-any CUST6-SHAPER match service instance ethernet 60 class-map match-any CUST9-SHAPER match service instance ethernet 90 class-map match-any CUST8-SHAPER match service instance ethernet 80 class-map match-any CUST10-SHAPER match service instance ethernet 100 class-map match-any CUST11-SHAPER match service instance ethernet 110 policy-map QOS-OUT-PORT-GI015-PARENT class CUST1-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST2-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST3-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST4-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST5-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST6-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST7-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST8-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST9-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST10-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT class CUST11-SHAPER shape average 10000000 service-policy PE-QOS-CPE-OUT interface GigabitEthernet0/15 description 100Mbps link to layer 2 access switch 2960 speed 100 ! Just for LAB purposes, field unit auto-negs to 100/Full duplex full ! Just for LAB purposes, field unit auto-negs to 100/Full service-policy input PE-QOS-CPE-IN service-policy output QOS-OUT-PORT-GI015-PARENT On the unit in the field (with the same IOS version, 15.3(3)s) when either trying to apply the child policy PE-QOS-CPE-OUT (which just uses percentages) under the PARENT policy (which is suppose to provide the shape) or by first creating the 11 shapers and childs and then trying to apply the service policy to the interface, it gives the same error through both methods; ME3800#conf t Enter configuration commands, one per line. End with CNTL/Z. ME3800(config)#policy-map PE-QOS-OUT-PORT-GI021-PARENT ME3800(config-pmap)#class Customer11-PS ME3800(config-pmap-c)#service-policy PE-QOS-CUSTOMER-OUT QoS:Bandwidth oversubscribed in the interface QoS: Policy attachment failed for policymap PE-QOS-CUSTOMER-OUT % service-policy PE-QOS-CUSTOMER-OUT of type default is not allowed in policy-map PE-QOS-OUT-PORT-GI021-PARENT of type default Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
