On 5 Jul 2014 00:10, "CiscoNSP List" <[email protected]> wrote:
> Site A will have vlan 10 - 50Mb service, placed in VRF (So all ok to shape on Client side ME3400, and also on our PE at L3) > > > Site B will have two vlans - 20 and 30 - 50Mb service, vlan 20 placed in VRF, vlan 30 trunked to a new colo switch they are now installing in the DataCentre. The following config should do what you want; you would need to make service instances on the L2 aggregation port for each VLAN coming in and set up a bridge domain for each. You can match the two VLANs going to site B in one class map and shape that to 50Mbps. conf t vlan 10 name Cust1-SiteA vlan 20 name Cust1-SiteB vlan 30 name Cust1-SiteB-L2 int gi0/1 description *L2 Trunk from Tail Provider* switchport mode trunk switchport trunk allowed vlan none ! service instance 10 ethernet description Cust1-VLAN10-SiteA encapsulation dot1q 10 rewrite ingress tag pop 1 symmetric bridge-domain 10 ! service instance 20 ethernet description Cust1-VLAN20-SiteB encapsulation dot1q 20 rewrite ingress tag pop 1 symmetric bridge-domain 20 ! service instance 30 ethernet description Cust1-VLAN30-SiteB-L2 encapsulation dot1q 30 rewrite ingress tag pop 1 symmetric bridge-domain 30 ! class-map match-any CM-Cust1-SiteB-50Mbps match service instance ethernet 20 match service instance ethernet 30 policy-map PM-CPE-OUT-PARENT class CM-Cust1-SiteB-20M shape average 20000000 Interface Vlan10 Description *Link to Cust1 Site A* ip vrf forwarding Cust1 ip address 10.0.0.1 255.255.255.252 Interface Vlan 20 Description *Link to Cust1 Site B* ip vrf forwarding Cust1 ip address 10.0.0.5 255.255.255.252 ! VLAN 30 the L2 link is bridge to bridge domain 30. No need for a Layer 3 SVI. On the outgoing port to the Cust DC put that I to VLAN 30 also Interface gi0/2 Description Link to DC Switchport mode trunk Switchport trunk allowed vlan 30 ! If you have multiple VLANs going to the DC you can use service instances on that port too, or if the link to the DC is another tail circuit on gi0/1 from the same provider you can modify service instance 30 to bridge both VLANs together (VLAN 30 and the DC VLaN). Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
