On 8/5/2014 4:03 AM, Rod James Bio wrote:
Hi, I'd like to ask anyone in the group who owns cisco 7600 if they
had experience when they adjusted the allocation to increase the
maximum routes for ipv4 etc. We are near the 512K ipv4 limit (~509K)
for the 7600 (default size) and I tried adjusting the tcam allocation
by running:
mls cef maximum-routes ip 750
mls cef maximum-routes ipv6 100
mls cef maximum-routes mpls 10
mls cef maximum-routes ip-multicast 28
But after rebooting the whole box I got an error,
"Maximum routes config mismatch. reconfigure the maximum routes values
and reload the box" (Sorry this is all I copied from the console)
and the tcam was back to the default values.
Did it force a reboot? Do 'rem com sw sh bootv' and check the SP config
register. If it (or perhaps the standby SP) don't match the RP, do
'conf t; config-register 0x2102; end; copy run start' and retry.
pt
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
