As already mentioned, the sum should be 1024k, for example, I have this on a SUP720-3BXL:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ sup720-3bxl#show mls cef maximum-routes FIB TCAM maximum routes : ======================= Current :- ------- IPv4 - 1007k MPLS - 1k (default) IPv6 + IP Multicast - 8k (default) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1007+1+(2x8) = 1024 Regards, Antonio Soares, CCIE #18473 (RS/SP) [email protected] http://www.ccie18473.net -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Rod James Bio Sent: terça-feira, 5 de Agosto de 2014 16:13 To: [email protected] Subject: Re: [c-nsp] Adjusting TCAM allocation weird behavior on 7600 I read before the link you sent. BTW, Here is the output of "sh mls cef max": #sh mls cef maximum-routes FIB TCAM maximum routes : ======================= Current :- ------- IPv4 + MPLS - 512k (default) IPv6 + IP Multicast - 256k (default) User configured :- --------------- IPv4 - 600k MPLS - 10k IPv6 - 100k IP Multicast - 28k Upon reboot :- IPv4 - 600k MPLS - 10k IPv6 - 100k IP Multicast - 28k Regards, On 8/5/14, 22:15, Antonio Soares wrote: > Check this document, maybe it can help you: > > http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-serie > s-swit ches/117712-problemsolution-cat6500-00.html > > Can you share the "show mls cef max" output ? > > > > Regards, > > Antonio Soares, CCIE #18473 (RS/SP) > [email protected] > http://www.ccie18473.net > > > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf > Of Rod James Bio > Sent: terça-feira, 5 de Agosto de 2014 12:03 > To: [email protected] > Subject: [c-nsp] Adjusting TCAM allocation weird behavior on 7600 > > Hi, I'd like to ask anyone in the group who owns cisco 7600 if they > had experience when they adjusted the allocation to increase the > maximum routes for ipv4 etc. We are near the 512K ipv4 limit (~509K) > for the > 7600 (default size) and I tried adjusting the tcam allocation by running: > > mls cef maximum-routes ip 750 > mls cef maximum-routes ipv6 100 > mls cef maximum-routes mpls 10 > mls cef maximum-routes ip-multicast 28 > > But after rebooting the whole box I got an error, "Maximum routes > config mismatch. reconfigure the maximum routes values and reload the > box" (Sorry this is all I copied from the console) and the tcam was > back to the default values. > > I have a dual RSP720-3CXL-10GE sups on sso mode and > c7600rsp72043-adventerprisek9-mz.153-1.S1.bin if those info help. > > Thanks, > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
