This is what I tried,
#sh mls cef maximum-routes
FIB TCAM maximum routes :
=======================
Current :-
-------
IPv4 + MPLS - 512k (default)
IPv6 + IP Multicast - 256k (default)
User configured :-
---------------
IPv4 + MPLS - 768k (default)
IPv6 - 100k
IP Multicast - 28k
After a wr mem and reboot this is what I got:
*Aug 6 02:15:46.975 PHT: %MLSCEF-SP-1-MAX_ROUTE_MISMATCH: Maximum
routes config mismatch. Reconfigure the maximum routes values and reload
the box.
As you will see the max routes adds to 1024k but still It resets to the
default values.
Regards,
On 8/6/14, 1:28, Antonio Soares wrote:
As already mentioned, the sum should be 1024k, for example, I have this on a
SUP720-3BXL:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
sup720-3bxl#show mls cef maximum-routes
FIB TCAM maximum routes :
=======================
Current :-
-------
IPv4 - 1007k
MPLS - 1k (default)
IPv6 + IP Multicast - 8k (default)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1007+1+(2x8) = 1024
Regards,
Antonio Soares, CCIE #18473 (RS/SP)
[email protected]
http://www.ccie18473.net
-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of Rod
James Bio
Sent: terça-feira, 5 de Agosto de 2014 16:13
To: [email protected]
Subject: Re: [c-nsp] Adjusting TCAM allocation weird behavior on 7600
I read before the link you sent.
BTW, Here is the output of "sh mls cef max":
#sh mls cef maximum-routes
FIB TCAM maximum routes :
=======================
Current :-
-------
IPv4 + MPLS - 512k (default)
IPv6 + IP Multicast - 256k (default)
User configured :-
---------------
IPv4 - 600k
MPLS - 10k
IPv6 - 100k
IP Multicast - 28k
Upon reboot :-
IPv4 - 600k
MPLS - 10k
IPv6 - 100k
IP Multicast - 28k
Regards,
On 8/5/14, 22:15, Antonio Soares wrote:
Check this document, maybe it can help you:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-serie
s-swit ches/117712-problemsolution-cat6500-00.html
Can you share the "show mls cef max" output ?
Regards,
Antonio Soares, CCIE #18473 (RS/SP)
[email protected]
http://www.ccie18473.net
-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf
Of Rod James Bio
Sent: terça-feira, 5 de Agosto de 2014 12:03
To: [email protected]
Subject: [c-nsp] Adjusting TCAM allocation weird behavior on 7600
Hi, I'd like to ask anyone in the group who owns cisco 7600 if they
had experience when they adjusted the allocation to increase the
maximum routes for ipv4 etc. We are near the 512K ipv4 limit (~509K)
for the
7600 (default size) and I tried adjusting the tcam allocation by running:
mls cef maximum-routes ip 750
mls cef maximum-routes ipv6 100
mls cef maximum-routes mpls 10
mls cef maximum-routes ip-multicast 28
But after rebooting the whole box I got an error, "Maximum routes
config mismatch. reconfigure the maximum routes values and reload the
box" (Sorry this is all I copied from the console) and the tcam was
back to the default values.
I have a dual RSP720-3CXL-10GE sups on sso mode and
c7600rsp72043-adventerprisek9-mz.153-1.S1.bin if those info help.
Thanks,
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
