Hello, I was under assumption that serivice unsupported-transceiver would make all transceivers usable. It seems that is not the case. I tried installing three different SFP+ optics to an SFP slot of a FourX adapter connected to WS-X6904-40G. All these attempts resulted in the port ending up in err-disabled state. The switch runs 15.1(2)SY2 on sup2t. Logs show following:
%PM_SCP-3-TRANSCEIVER_UNSUPPORTED: Unsupported transceiver in LAN port 4/13 %PM-4-ERR_RECOVER: Attempting to recover from transceiver-incomp err-disable state on Te4/13 %PM-4-ERR_DISABLE: transceiver-incomp error detected on Te4/13, putting Te4/13 in err-disable state %PM_SCP-3-TRANSCEIVER_UNSUPPORTED: Unsupported transceiver in LAN port 4/13 Is this a known behaviour? Is there any workaround or do I need to buy more Cisco like SFP+'s? The command "no errdisable detect cause gbic-invalid" did not help. Cheers, Matti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
