On Thu, 27 Nov 2014, Simon Lockhart wrote:
In simple terms (and I apologise if this is fixed in Sup2T, as most of my experience has been on the Sup720), with the 6500/6800 platform, you can only do port-to-port or subint-to-subint VPWS, but not port-to-subint (which you can on the more capable boxes, or with the ES cards on the 6500/6800).
Works fine without any additional cards on SUP2T. # sh ver | i IOS Cisco IOS Software, s2t54 Software (s2t54-ADVIPSERVICESK9_NPE-M), Version 15.0(1)SY1, RELEASE SOFTWARE (fc4) # sh run TenGigabitEthernet1/3.300 interface TenGigabitEthernet1/3.300 encapsulation dot1Q 300 xconnect X.X.X.X 103 encapsulation mpls end /Jonas _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
