Hi all,
We use a 7600 with a sup720xl and we receive 3 full bgp tables, some partial
transit and some peering.
According to sh bgp sum bgp is using:
ipv4 ~250MB
ipv6 ~30MB
But the 1GB dram is almost full.
sh memory summary
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 46ABB9D0 894682672 785658748 109023924 54382492 48475720
Sh proc mem shows the bgp proces is using a lot more memory the ~300MB
PID TTY Allocated Freed Holding Getbufs Retbufs Process
496 0 799340392 180557004 517282488 0 0 BGP Router
how does this come and is this normal? I was expecting i could use some more
full tables on this router.
Thanks,
Erik
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
