Yes its a sub720-3bxl with IOS 12.2SRE. We are not using soft-reconfig. Why is the "sh bgp all sum" around 300MB and the sh prec mem shows bgp is using 90%, or around 800MB.
I just applied a filter for a default route only on one of the transits. I can see i receive only 1 route but the mem usage is the same! Thanks, Erik ----- Oorspronkelijk bericht ----- Van: "Nick Hilliard" <[email protected]> Aan: "Erik Klaassen" <[email protected]>, [email protected] Verzonden: Woensdag 11 maart 2015 13:57:05 Onderwerp: Re: [c-nsp] BGP dram confusion On 11/03/2015 12:45, Erik Klaassen wrote: > But the 1GB dram is almost full. correct - this is a long time coming for the sup720/rsp720 platform. If you have soft-reconfiguration inbound, you'll need to drop that from the configuration. If you can downgrade to IOS 12.2SR, that will also help RAM usage. If this is a sup720-3bxl, you're stuck with 1G RAM and you cannot upgrade. If it's an rsp720, you can upgrade the RAM on the card with p/n MEM-RSP720-2G or a third party equivalent. Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
