On Sun, 27 Sep 2015, Shoaib Farhan wrote:
Hi everyone,
We are going to migrate to 7600 series router and after some study we came
to below sets for router. We would run L2/L3 MPLS VPN, VPLS, BGP, IPv6,
OSPF, Netflow. Traffic would be over 2 gbps and we need few 10G ports and
scope for future growth and also consider cost. Which set would be the
better?
If you're buying the ES or SIP cards for the 7600, then you might as well
start looking into ASR1k and ASR9k (as others have suggested), because
most likely the price difference is going to be small and you'll get
hardware/software that is going to be supported for a lot longer time.
--
Mikael Abrahamsson email: swm...@swm.pp.se
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
