On 01/10/2015 04:27, Shoaib Farhan wrote: > Look at asr 9001 and 1006. asr 9001 looks more promising. Asked for price > to our vendors. Lets what they will say. > > We have asked for the below product. Do I need any licensed for running > MPLS?
yes, if you're running the device as a PE and you want to terminate l3vpn edge services on it. Otherwise no. Regarding differences, this is a good place to start, even if the software version is a bit out of date: > http://www.cisco.com/c/en/us/td/docs/ios_xr_sw/iosxr_r3-3/conversion/reference/guide/cnvt_33/cn33main.pdf Nick > *Product Name Part number* > ASR 9001 Router with 4 x 10 GE ASR-9001 > 20 x 1 GE Modular Port Adapter A9K-MPA-20x1GE > AC Power Entry module A9K-750W-AC > > Can you give me short feature difference between IOS and IOS XR. > > As for ASR1000 it will be very costly. we have the below set > > chassis + RP2 + ESP-40 + Line Card/ SIP+SPA. > > > > > On Mon, Sep 28, 2015 at 12:50 PM, Mikael Abrahamsson <[email protected]> > wrote: > >> On Sun, 27 Sep 2015, Shoaib Farhan wrote: >> >> Hi everyone, >>> >>> We are going to migrate to 7600 series router and after some study we came >>> to below sets for router. We would run L2/L3 MPLS VPN, VPLS, BGP, IPv6, >>> OSPF, Netflow. Traffic would be over 2 gbps and we need few 10G ports and >>> scope for future growth and also consider cost. Which set would be the >>> better? >>> >> >> If you're buying the ES or SIP cards for the 7600, then you might as well >> start looking into ASR1k and ASR9k (as others have suggested), because most >> likely the price difference is going to be small and you'll get >> hardware/software that is going to be supported for a lot longer time. >> >> -- >> Mikael Abrahamsson email: [email protected] >> > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
