Look at asr 9001 and 1006. asr 9001 looks more promising. Asked for price to our vendors. Lets what they will say.
We have asked for the below product. Do I need any licensed for running MPLS? *Product Name Part number* ASR 9001 Router with 4 x 10 GE ASR-9001 20 x 1 GE Modular Port Adapter A9K-MPA-20x1GE AC Power Entry module A9K-750W-AC Can you give me short feature difference between IOS and IOS XR. As for ASR1000 it will be very costly. we have the below set chassis + RP2 + ESP-40 + Line Card/ SIP+SPA. On Mon, Sep 28, 2015 at 12:50 PM, Mikael Abrahamsson <[email protected]> wrote: > On Sun, 27 Sep 2015, Shoaib Farhan wrote: > > Hi everyone, >> >> We are going to migrate to 7600 series router and after some study we came >> to below sets for router. We would run L2/L3 MPLS VPN, VPLS, BGP, IPv6, >> OSPF, Netflow. Traffic would be over 2 gbps and we need few 10G ports and >> scope for future growth and also consider cost. Which set would be the >> better? >> > > If you're buying the ES or SIP cards for the 7600, then you might as well > start looking into ASR1k and ASR9k (as others have suggested), because most > likely the price difference is going to be small and you'll get > hardware/software that is going to be supported for a lot longer time. > > -- > Mikael Abrahamsson email: [email protected] > -- Regards, Md. Shoaib Farhan <http://www.telnet.com.bd> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
