Yes, you can, providing the MTU you are setting for the xconnect is lower than the interface MTU, if it is not, the command will (at least in XE 3.13) change the MTU of the interface that has the service instance
Kind regards, Sibbi On 07/11/15 05:59, "cisco-nsp on behalf of George Giannousopoulos" <[email protected] on behalf of [email protected]> wrote: >Hi, > >I can't really test it right now, but you should be able to adjust MTU as a >sub-command of xconnect, under the service instance. > >-- >George > >On Sat, Nov 7, 2015 at 12:03 AM, Mohammad Khalil <[email protected]> >wrote: > >> Hi all >> I was wondering on ASR903 , can I adjust MTU under the service instance ? >> I can do that under the BDI interface , but that will do it for me ? >> >> BR, >> Mohammad >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
