Hi all
I have discovered that I can change the MTU as the below syntax
interface GigabitEthernet0/0/1
no ip address
service instance 100 ethernet
xconnect x.x.x.x {VC_ID} encapsulation mpls
mtu {}
But If I configured the below
l2vpn xconnect context {NAME}
There is no option for the MTU under it
> From: [email protected]
> To: [email protected]; [email protected]
> CC: [email protected]
> Subject: Re: [c-nsp] ASR903 Service instance MTU
> Date: Sat, 7 Nov 2015 07:12:35 +0000
>
> Yes, you can, providing the MTU you are setting for the xconnect is lower
> than the interface MTU, if it is not, the command will (at least in XE 3.13)
> change the MTU of the interface that has the service instance
>
> Kind regards,
> Sibbi
>
>
>
> On 07/11/15 05:59, "cisco-nsp on behalf of George Giannousopoulos"
> <[email protected] on behalf of [email protected]> wrote:
>
> >Hi,
> >
> >I can't really test it right now, but you should be able to adjust MTU as a
> >sub-command of xconnect, under the service instance.
> >
> >--
> >George
> >
> >On Sat, Nov 7, 2015 at 12:03 AM, Mohammad Khalil <[email protected]>
> >wrote:
> >
> >> Hi all
> >> I was wondering on ASR903 , can I adjust MTU under the service instance ?
> >> I can do that under the BDI interface , but that will do it for me ?
> >>
> >> BR,
> >> Mohammad
> >>
> >> _______________________________________________
> >> cisco-nsp mailing list [email protected]
> >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>
> >_______________________________________________
> >cisco-nsp mailing list [email protected]
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
