There isn't EIGRP but there _IS_ RIP? Really? I thought this was 2016. -- Jerry Bacon Senior Network Engineer StarTouch, Inc. http://www.startouch.com 360-543-5679 ext. 111 Microwave - Fiber Optics - Internet Services
-----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Aaron ... I don't see eigrp. RP/0/RP0/CPU0:eng-lab-5001-1#conf Tue Feb 2 08:16:26.487 CST roRP/0/RP0/CPU0:eng-lab-5001-1(config)#router router router-convergence RP/0/RP0/CPU0:eng-lab-5001-1(config)#router ? bgp BGP configuration subcommands hsrp HSRP configuration subcommands isis ISO IS-IS lisp LISP configuration subcommands ospf OSPF configuration subcommands ospfv3 IPv6 Open Shortest Path First protocol (OSPFv3) rib RIB configuration subcommands rip RIP configuration subcommands rpl IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL) static Static route configuration subcommands vrrp VRRP configuration subcommands RP/0/RP0/CPU0:eng-lab-5001-1(config)#router eigrp 1 ^ % Invalid input detected at '^' marker. ... RP/0/RP0/CPU0:eng-lab-5001-1#sh protocols ? afi-all IPv4 and IPv6 commands all All protocols bgp Border Gateway Protocol (BGP) ipv4 IPv4 commands ipv6 IPv6 commands isis IS-IS protocol ospf IPv4 OSPF protocol rip RIP protocol | Output Modifiers <cr> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
