Hi, I’ve got a couple of ASR920s in the lab and I’m curious about how one now does port based EoMPLS relative to the ME3600X:
On the ME3600, it was: ! interface GigabitEthernet0/1 no switchport xconnect 1.1.1.1 69 encapsulation mpls ! Now, it appears that interface level xconnect is no longer supported in favor of full service instance configuration mode for all traffic: ! interface GigabitEthernet0/0/1 service instance 1 ethernet encapsulation default xconnect 1.1.1.1 69 encapsulation mpls ! Is that correct? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
