For posterity, here is a link to the relevant docs (at this moment in time):
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-l2-vpns-xe-3s-asr920-book/mp-any-transport-xe.html#GUID-FB013E0C-B37F-48CF-B2B0-374A45B9B9EC
-- Stephen
On 2016-06-03 7:25 AM, Mark Tinka wrote:
On 3/Jun/16 12:58, Jason Lixfeld wrote:
Hi,
I’ve got a couple of ASR920s in the lab and I’m curious about how one now does
port based EoMPLS relative to the ME3600X:
On the ME3600, it was:
!
interface GigabitEthernet0/1
no switchport
xconnect 1.1.1.1 69 encapsulation mpls
!
Now, it appears that interface level xconnect is no longer supported in favor
of full service instance configuration mode for all traffic:
!
interface GigabitEthernet0/0/1
service instance 1 ethernet
encapsulation default
xconnect 1.1.1.1 69 encapsulation mpls
!
Is that correct?
Yes, that is the the way you do port-mode EoMPLS on the ASR920.
As long as your "encapsulation" is "default", whatever comes in goes out
on to the pw a la port-mode EoMPLS.
Mark.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
