On 3/Jun/16 12:58, Jason Lixfeld wrote:
> Hi, > > I’ve got a couple of ASR920s in the lab and I’m curious about how one now > does port based EoMPLS relative to the ME3600X: > > On the ME3600, it was: > > ! > interface GigabitEthernet0/1 > no switchport > xconnect 1.1.1.1 69 encapsulation mpls > ! > > Now, it appears that interface level xconnect is no longer supported in favor > of full service instance configuration mode for all traffic: > > ! > interface GigabitEthernet0/0/1 > service instance 1 ethernet > encapsulation default > xconnect 1.1.1.1 69 encapsulation mpls > ! > > Is that correct? Yes, that is the the way you do port-mode EoMPLS on the ASR920. As long as your "encapsulation" is "default", whatever comes in goes out on to the pw a la port-mode EoMPLS. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
