On 21 June 2016 at 00:06, Mike <[email protected]> wrote: > sh mpls l2transport vc detail ... > Last error: MPLS dataplane reported a fault to the nexthop > Output interface: none, imposed label stack {} > Preferred path: not configured > Default path: no route > No adjacency
> ping mpls ipv4 10.0.15.2 255.255.255.255 > Sending 5, 72-byte MPLS Echos to Target FEC Stack TLV descriptor, > timeout is 2 seconds, send interval is 0 msec: > > Codes: '!' - success, 'Q' - request not sent, ... > Type escape sequence to abort. > QQQQQ > Success rate is 0 percent (0/5) > Total Time Elapsed 7 ms As with any issue that relates to something one is trying to configure, you should include the config! Looks like something is misconfigured. Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
