The Sup6T is still TCAM limited. We are moving to ASR9Ks. But we have used the ASR1Ks where we need full netflow capture with great success. The port density and total throughput is not as high as the 6500 though.
Mack McBride | Senior Network Architect | ViaWest, Inc. O: 720.891.2502 | C: 303.720.2711 | [email protected] | www.viawest.com -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Gert Doering Sent: Tuesday, July 05, 2016 1:03 PM To: Peter Kranz Cc: 'cisco-nsp'; 'Jon Lewis' Subject: Re: [c-nsp] SUP720's memory, looking at options.. hi, On Tue, Jul 05, 2016 at 10:54:47AM -0700, Peter Kranz wrote: > There is also the option of jumping to a used SUP2T or a SUP6T in your > 6500 chassis. Depending on the line cards you have, you might have to > replace some of them. Has anyone tried 6T yet? Does it do useful netflow? 2T had great promises, but vastly underdelivered, so we're halfway ready to just leave the platform completely... gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [email protected] fax: +49-89-35655025 [email protected] This message contains information that may be confidential, privileged or otherwise protected by law from disclosure. It is intended for the exclusive use of the addressee(s). Unless you are the addressee or authorized agent of the addressee, you may not review, copy, distribute or disclose to anyone the message or any information contained within. If you have received this message in error, please contact the sender by electronic reply and immediately delete all copies of the message. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
